report generated at Fri Aug 27 00:39:45 PDT 2010 on xobsd.jkhome
| Package | Status | Errors | Tests |
| m3-win/import-libs | build OK | no tests | |
| m3-sys/m3cc | build OK | no tests | |
| m3-libs/m3core | build OK | no src/m3makefile | |
| m3-libs/libm3 | build OK | test result details for m3-libs/libm3 | |
| m3-sys/windowsResources | build OK | no tests | |
| m3-libs/parseparams | build OK | no tests | |
| m3-libs/patternmatching | build OK | test result details for m3-libs/patternmatching | |
| m3-libs/sysutils | build OK | no tests | |
| m3-libs/unittest | build OK | no tests | |
| m3-sys/m3middle | build OK | no tests | |
| m3-sys/m3objfile | build OK | no tests | |
| m3-sys/m3linker | build OK | no tests | |
| m3-sys/m3back | build OK | no tests | |
| m3-sys/m3staloneback | build OK | no tests | |
| m3-sys/m3front | build OK | no tests | |
| m3-sys/m3quake | build OK | test result details for m3-sys/m3quake | |
| m3-sys/cm3 | build OK | test result details for m3-sys/cm3 | |
| m3-sys/m3scanner | build OK | no tests | |
| m3-sys/m3tools | build OK | no tests | |
| m3-sys/m3cgcat | build OK | no tests | |
| m3-sys/m3cggen | build OK | no tests | |
| m3-sys/m3gdb | build OK | ../../gdb/gdb/top.c:874: warning: strcpy() is almost always misused, please use strlcpy() libgdb.a(top.o)(.text+0xa70):../../gdb/gdb/top.c:875: warning: strcat() is almost always misused, please use strlcat() ../../gdb/gdb/remote.c:3314: warning: sprintf() is often misused, please use snprintf() ../../gdb/gdb/top.c:874: warning: strcpy() is almost always misused, please use strlcpy() libgdb.a(top.o)(.text+0xa70):../../gdb/gdb/top.c:875: warning: strcat() is almost always misused, please use strlcat() ../../gdb/gdb/remote.c:3314: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-tools/m3bundle | build OK | no tests | |
| m3-sys/mklib | build OK | no tests | |
| m3-sys/fix_nl | build OK | no tests | |
| m3-sys/libdump | build OK | no tests | |
| m3-libs/tempfiles | build OK | no tests | |
| m3-libs/arithmetic | build OK | test result details for m3-libs/arithmetic | |
| m3-libs/unittest-numeric | build OK | no tests | |
| m3-libs/bitvector | build OK | test result details for m3-libs/bitvector | |
| m3-libs/digraph | build OK | no tests | |
| m3-libs/realgeometry | build OK | no tests | |
| m3-libs/set | build OK | no tests | |
| m3-libs/slisp | build OK | test result details for m3-libs/slisp | |
| m3-libs/sortedtableextras | build OK | no src/m3makefile | |
| m3-libs/table-list | build OK | no tests | |
| m3-libs/tcl | not supported on I386_OPENBSD | not supported on I386_OPENBSD | |
| m3-comm/tcp | build OK | no tests | |
| m3-sys/cm3ide | build OK | no tests | |
| m3-comm/udp | build OK | test result details for m3-comm/udp | |
| m3-libs/libsio | build OK | no tests | |
| m3-libs/libbuf | build OK | no tests | |
| m3-libs/debug | build OK | no tests | |
| m3-libs/listfuncs | build OK | no tests | |
| m3-libs/embutils | build OK | no tests | |
| m3-libs/m3tk-misc | build OK | no tests | |
| m3-www/http | build OK | no tests | |
| m3-libs/binIO | build OK | test result details for m3-libs/binIO | |
| m3-libs/commandrw | build OK | no tests | |
| m3-comm/tapi | not supported on I386_OPENBSD | not supported on I386_OPENBSD | |
| m3-comm/serial | not supported on I386_OPENBSD | not supported on I386_OPENBSD | |
| m3-tools/m3tk | build OK | no tests | |
| m3-tools/mtex | build OK | no tests | |
| m3-tools/m3totex | build OK | no tests | |
| m3-tools/m3tohtml | build OK | no tests | |
| m3-tools/m3scan | build OK | no tests | |
| m3-tools/m3markup | build OK | no tests | |
| m3-tools/m3browser | build OK | no tests | |
| m3-tools/cmpdir | build OK | no tests | |
| m3-tools/cmpfp | build OK | no tests | |
| m3-tools/dirfp | build OK | no tests | |
| m3-tools/uniq | build OK | no tests | |
| m3-comm/netobj | build OK | no src/m3makefile | |
| m3-comm/netobjd | build OK | no tests | |
| m3-comm/stubgen | build OK | no tests | |
| m3-comm/events | build OK | no src/m3makefile | |
| m3-comm/rdwr | build OK | no src/m3makefile | |
| m3-comm/sharedobj | build OK | no src/m3makefile | |
| m3-comm/sharedobjgen | build OK | no src/m3makefile | |
| m3-db/odbc | build OK | test result details for m3-db/odbc | |
| m3-db/postgres95 | build OK | test result details for m3-db/postgres95 | |
| m3-db/db | build OK | test result details for m3-db/db | |
| m3-db/smalldb | build OK | no tests | |
| m3-db/stablegen | build OK | no tests | |
| m3-db/stable | build OK | test result details for m3-db/stable | |
| m3-ui/X11R4 | build OK | no tests | |
| m3-ui/ui | build OK | no src/m3makefile | |
| m3-ui/PEX | build OK | no tests | |
| m3-ui/vbtkit | build OK | no tests | |
| m3-ui/cmvbt | build OK | no tests | |
| m3-ui/jvideo | build OK | no tests | |
| m3-ui/videovbt | build OK | no tests | |
| /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-www/web | build OK | no tests | |
| /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-www/proxy | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-ui/formsvbtpixmaps | build OK | no tests | |
| m3-ui/formsvbt | build OK | no tests | |
| m3-ui/formsview | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-ui/formsedit | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-ui/codeview | build OK | no tests | |
| m3-tools/cvsup/suplib | build OK | no tests | |
| m3-tools/cvsup/client | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-tools/cvsup/server | build OK | no tests | |
| m3-tools/cvsup/cvpasswd | build OK | no tests | |
| m3-ui/mg | build OK | no tests | |
| m3-ui/mgkit | build OK | no tests | |
| m3-ui/opengl | build OK | no tests | |
| m3-ui/anim3D | build OK | no tests | |
| m3-ui/zeus | build OK | no tests | |
| m3-ui/m3zume | build OK | no tests | |
| m3-obliq/synloc | build OK | no tests | |
| m3-obliq/synex | build OK | no tests | |
| m3-obliq/metasyn | build OK | no tests | |
| m3-obliq/obliqrt | build OK | no tests | |
| m3-obliq/obliqparse | build OK | no tests | |
| m3-obliq/obliqprint | build OK | no tests | |
| m3-obliq/obliq | build OK | no tests | |
| m3-obliq/obliqlibemb | build OK | no tests | |
| m3-obliq/obliqlibm3 | build OK | no tests | |
| m3-obliq/obliqlibui | build OK | no tests | |
| m3-obliq/obliqlibanim | build OK | no tests | |
| m3-obliq/obliqsrvstd | build OK | no tests | |
| m3-obliq/obliqsrvui | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-obliq/obliqbinmin | build OK | no tests | |
| m3-obliq/obliqbinstd | build OK | no tests | |
| m3-obliq/obliqbinui | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-obliq/obliqbinanim | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-obliq/obliqlib3D | build OK | no tests | |
| m3-obliq/visualobliq | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-obliq/vocgi | build OK | no tests | |
| m3-obliq/voquery | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-obliq/vorun | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-ui/webvbt | build OK | no tests | |
| m3-tools/recordheap | build OK | no tests | |
| m3-tools/rehearsecode | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-tools/replayheap | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-tools/showheap | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-tools/shownew | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-tools/showthread | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-ui/juno-2/juno-app/pkl-fonts | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-ui/juno-2/juno-machine | build OK | unsupported m3_option value: "-O" |
no tests |
| m3-ui/juno-2/juno-compiler | build OK | unsupported m3_option value: "-O" |
no src/m3makefile |
| m3-ui/juno-2/juno-app | build OK | unsupported m3_option value: "-O" /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-demo/cube | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-demo/calculator | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-demo/fisheye | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-demo/mentor | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| caltech-parser/cit_common | build OK | no tests | |
| caltech-parser/m3tmplhack | build OK | no src/m3makefile | |
| caltech-parser/cit_util | build OK | no tests | |
| caltech-parser/term | build OK | no tests | |
| m3-libs/deepcopy | build OK | no src/m3makefile | |
| caltech-parser/paneman | build OK | no tests | |
| caltech-parser/paneman/kemacs | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| caltech-parser/drawcontext | build OK | test result details for caltech-parser/drawcontext | |
| caltech-parser/drawcontext/dcpane | build OK | no tests | |
| caltech-parser/drawcontext/kgv | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| caltech-parser/hack | build OK | no tests | |
| caltech-parser/m3browserhack | build OK | no tests | |
| caltech-parser/parserlib/ktoklib | build OK | no tests | |
| caltech-parser/parserlib/klexlib | build OK | no tests | |
| caltech-parser/parserlib/kyacclib | build OK | no tests | |
| caltech-parser/parserlib/ktok | build OK | no tests | |
| caltech-parser/parserlib/klex | build OK | no tests | |
| caltech-parser/parserlib/kyacc | build OK | no tests | |
| caltech-parser/parserlib/kext | build OK | no tests | |
| caltech-parser/parserlib/parserlib | build OK | test result details for caltech-parser/parserlib/parserlib | |
| caltech-parser/parserlib/parserlib/test | build OK | no tests | |
| m3-tools/pp | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm 3/m3-tools/pp/I386_OPENBSD/../src/lex_help.h:64: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-tools/kate | build OK | no tests | |
| m3-libs/sgml | build OK | no tests | |
| m3-www/deckscape | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-www/webscape | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| m3-www/webcat | build OK | no tests | |
| /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-ui/bicycle | build OK | no tests | |
| /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-games/badbricks | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-games/columns | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-games/fours | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-games/maze | build OK | no tests | |
| /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-games/solitaire | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
| /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-games/tetris | build OK | /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() |
no tests |
--- building in I386_OPENBSD ---
=== performing tests in /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/os ===
cm3 -build -override -DROOT=/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3 -DRUN -DTEST
--- building in I386_OPENBSD ---
--- tests in /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/os/I386_OPENBSD---
new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking OSTest
performing pathname-tests...
/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/os/I386_OPENBSD
pathname-tests OK
performing process-tests...
/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/os/I386_OPENBSD
a b c
process-tests OK
performing filesystem-tests...
/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/os/I386_OPENBSD
filesystem-tests differences:
--- ../src/filesystem-tests-output Sat Jul 25 05:25:49 2009
+++ ./filesystem-tests-output Fri Aug 27 01:00:50 2010
@@ -1,6 +1,6 @@
OS test shell
-("m3make.args" ".M3SHIP" ".M3EXPORTS" "OSTest.mx" "Subr.io" "PathnameTests.io" "PathnameTests.mo" ".M3WEB" "TextSubrTbl.io" "TextSubrTbl.mo" "OSTest.mo" "_m3main.mc" "OSTest" "_m3main.o" "pathname-tests-output" "process-tests-output" "filesystem-tests-output")
-(("m3make.args" RegularFile) (".M3SHIP" RegularFile) (".M3EXPORTS" RegularFile) ("OSTest.mx" RegularFile) ("Subr.io" RegularFile) ("PathnameTests.io" RegularFile) ("PathnameTests.mo" RegularFile) (".M3WEB" RegularFile) ("TextSubrTbl.io" RegularFile) ("TextSubrTbl.mo" RegularFile) ("OSTest.mo" RegularFile) ("_m3main.mc" RegularFile) ("OSTest" RegularFile) ("_m3main.o" RegularFile) ("pathname-tests-output" RegularFile) ("process-tests-output" RegularFile) ("filesystem-tests-output" RegularFile))
+("m3make.args" ".M3SHIP" ".M3EXPORTS" "OSTest.mx" "Subr.io" "PathnameTests.io" "PathnameTests.mo" ".M3WEB" "TextSubrTbl.io" "TextSubrTbl.mo" "OSTest.mo" "_m3main.mc" "OSTest" "_m3main.o" "pathname-tests-output" "process-tests-output" "filesystem-tests-output" "_m3main.c")
+(("m3make.args" RegularFile) (".M3SHIP" RegularFile) (".M3EXPORTS" RegularFile) ("OSTest.mx" RegularFile) ("Subr.io" RegularFile) ("PathnameTests.io" RegularFile) ("PathnameTests.mo" RegularFile) (".M3WEB" RegularFile) ("TextSubrTbl.io" RegularFile) ("TextSubrTbl.mo" RegularFile) ("OSTest.mo" RegularFile) ("_m3main.mc" RegularFile) ("OSTest" RegularFile) ("_m3main.o" RegularFile) ("pathname-tests-output" RegularFile) ("process-tests-output" RegularFile) ("filesystem-tests-output" RegularFile) ("_m3main.c" RegularFile))
(file 3)
(file 4)
cm3 returned 0
=== performing tests in /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/pqueue/fromtty ===
cm3 -build -override -DROOT=/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3 -DRUN -DTEST
--- building in I386_OPENBSD ---
new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking FromTTY
performing pqueue-change...
/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/pqueue/fromtty/I386_OPENBSD
change OK
performing pqueue-delete...
/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/pqueue/fromtty/I386_OPENBSD
delete OK
performing pqueue-dmin...
/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/pqueue/fromtty/I386_OPENBSD
dmin OK
performing pqueue-fromelts...
/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/pqueue/fromtty/I386_OPENBSD
fromelts OK
performing pqueue-heapgrow...
/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/pqueue/fromtty/I386_OPENBSD
heapgrow OK
cm3 returned 0
=== performing tests in /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/pqueue/heapsort1 ===
cm3 -build -override -DROOT=/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3 -DRUN -DTEST
--- building in I386_OPENBSD ---
new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking HeapSort
performing pqueue-heapsort1...
0 0 1 3 3 3 5 5 6 10 10 12 13 14 15 18 18 19 19 20
program returned 0
cm3 returned 0
=== performing tests in /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/pqueue/heapsort2 ===
cm3 -build -override -DROOT=/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3 -DRUN -DTEST
--- building in I386_OPENBSD ---
new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking HeapSort
performing pqueue-heapsort2...
1 1 3 5 5 5 6 8 11 11 11 11 13 14 15 15 16 16 19 20
program returned 0
cm3 returned 0
=== performing tests in /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/rw/autotest ===
cm3 -build -override -DROOT=/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3 -DRUN -DTEST
--- building in I386_OPENBSD ---
new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking AutoTest
performing rw-autotest...
program returned 0
grep returned 1
cm3 returned 0
=== performing tests in /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/rw/copy ===
cm3 -build -override -DROOT=/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3 -DRUN -DTEST
--- building in I386_OPENBSD ---
new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking Pump
performing rw-copy...
program returned 0
rw-copy OK
program returned 0
rw-copy OK
cm3 returned 0
=== performing tests in /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/sequence ===
cm3 -build -override -DROOT=/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3 -DRUN -DTEST
--- building in I386_OPENBSD ---
--- tests in /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/sequence/I386_OPENBSD---
new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking Test
IntSeq.T test passed
program returned 0
cm3 returned 0
=== performing tests in /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/sortedtable ===
cm3 -build -override -DROOT=/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3 -DRUN -DTEST
--- building in I386_OPENBSD ---
--- tests in /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/sortedtable/I386_OPENBSD---
new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking TestSortedTable
program returned 0
cm3 returned 0
=== performing tests in /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/libm3/tests/random ===
cm3 -build -override -DROOT=/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3 -DRUN -DTEST
--- building in I386_OPENBSD ---
cm3 returned 0
--- building in I386_OPENBSD ---
new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking test-regex
Enter a pattern followed by text...
OK '$' '' (TRUE)
OK 'a' 'a' (TRUE)
OK '[^a]' 'b' (TRUE)
OK '[]]' ']' (TRUE)
OK '^[a]]*$' 'a]' (TRUE)
OK '[a]' 'a' (TRUE)
OK '^' '' (TRUE)
OK '.' 'a' (TRUE)
OK '[a-c]' 'a' (TRUE)
OK '[a-c]' 'b' (TRUE)
OK '[a-c]' 'c' (TRUE)
OK 'a$' 'a' (TRUE)
OK '^a' 'aa' (TRUE)
OK 'a*' '' (TRUE)
OK 'a*' 'a' (TRUE)
OK 'a*' 'aa' (TRUE)
OK 'a*b' 'aab' (TRUE)
OK '[a]*' '' (TRUE)
OK '[a]*' 'a' (TRUE)
OK '[a]*' 'aa' (TRUE)
OK '[^a]*' '' (TRUE)
OK '[^a]*' 'b' (TRUE)
OK '[^a]*' 'bb' (TRUE)
OK '[ab]*' 'ab' (TRUE)
OK '.*' 'abaabaabaabaabaabaabaabaabaabaabaabaabaabaabaabaaba' (TRUE)
OK '^abc[a-c]*cba$' 'abcaaaaaabbbbbbbbbccccccbacbacbacbacbacbacba' (TRUE)
OK 'a*' '' (TRUE)
OK 'a*' 'a' (TRUE)
OK 'a*' 'aa' (TRUE)
OK '[a]*' '' (TRUE)
OK '[a]*' 'a' (TRUE)
OK '[a]*' 'aa' (TRUE)
OK '\(\)\1$' '' (TRUE)
OK '\(x\)\1*' 'x' (TRUE)
OK '\(x\)\1*' 'xxx' (TRUE)
OK '[a-c]*b*' 'abababababababababababababababababababababababababababab' (TRUE)
OK '\(x\)' 'x' (TRUE)
OK '^\(x\)\1$' 'xx' (TRUE)
OK '\(\)\1$' '' (TRUE)
OK '\(x\)\1*' 'x' (TRUE)
OK '\(x\)\1*' 'xxx' (TRUE)
OK '^\([a-z]*\)\([A-Z]*\)\2\1$' 'abcdefgABCDEFGABCDEFGabcdefg' (TRUE)
OK '\([^A-Z]\)\1' 'cc' (TRUE)
OK 'abc' 'abc' (TRUE)
OK 'abc' 'xbc' (FALSE)
OK 'abc' 'axc' (FALSE)
OK 'abc' 'abx' (FALSE)
OK 'abc' 'xabcy' (TRUE)
OK 'abc' 'ababc' (TRUE)
OK 'ab*c' 'abc' (TRUE)
OK 'ab*bc' 'abc' (TRUE)
OK 'ab*bc' 'abbc' (TRUE)
OK 'ab*bc' 'abbbbc' (TRUE)
OK '^abc$' 'abc' (TRUE)
OK '^abc$' 'abcc' (FALSE)
OK '^abc' 'abcc' (TRUE)
OK '^abc$' 'aabc' (FALSE)
OK 'abc$' 'aabc' (TRUE)
OK '^' 'abc' (TRUE)
OK 'a.c' 'abc' (TRUE)
OK 'a.c' 'axc' (TRUE)
OK 'a.*c' 'axyzc' (TRUE)
OK 'a.*c' 'axyzd' (FALSE)
OK 'a[bc]d' 'abc' (FALSE)
OK 'a[bc]d' 'abd' (TRUE)
OK 'a[b-d]e' 'abd' (FALSE)
OK 'a[b-d]e' 'ace' (TRUE)
OK 'a[b-d]' 'aac' (TRUE)
OK 'a[-b]' 'a-' (TRUE)
OK 'a[b-]' 'a-' (TRUE)
OK '[k]' 'ab' (FALSE)
OK 'a[b-a]' '' (FALSE)
OK 'a[]b' '' (FALSE)
OK 'a[' '' (FALSE)
OK 'a]' 'a]' (TRUE)
OK 'a[]]b' 'a]b' (TRUE)
OK 'a[^bc]d' 'aed' (TRUE)
OK 'a[^bc]d' 'abd' (FALSE)
OK 'a[^-b]c' 'adc' (TRUE)
OK 'a[^-b]c' 'a-c' (FALSE)
OK 'a[^]b]c' 'a]c' (FALSE)
OK 'a[^]b]c' 'adc' (TRUE)
OK '()ef' 'def' (FALSE)
OK '()*' '' (FALSE)
OK '*a' '' (FALSE)
OK '^*' '' (FALSE)
OK '$*' '' (TRUE)
OK '(*)b' '' (FALSE)
OK '$b' 'b' (FALSE)
** Unexpected unix re_comp error for a\: trailing backslash (\)
OK 'a\(b' 'a(b' (FALSE)
OK 'a\(*b' 'ab' (FALSE)
OK 'a\(*b' 'a((b' (FALSE)
OK 'a\b' 'a' (TRUE)
OK '((a))' 'abc' (FALSE)
OK '(a)b(c)' 'abc' (FALSE)
** Unexpected unix re_comp error for a**: repetition-operator operand invalid
OK '[^ab]*' 'cde' (TRUE)
** Unexpected unix re_comp error for : empty (sub)expression
OK 'abc' '' (FALSE)
OK 'a*' '' (TRUE)
OK 'abcd' 'abcd' (TRUE)
OK 'a\(bc\)d' 'abcd' (TRUE)
OK 'abcd*efg' 'abcdefg' (TRUE)
OK 'ab*' 'xabyabbbz' (TRUE)
OK 'ab*' 'xayabbbz' (TRUE)
OK '[abhgefdc]ij' 'hij' (TRUE)
OK 'a\([bc]*\)c*' 'abc' (TRUE)
OK 'a\([bc]*\)\(c*d\)' 'abcd' (TRUE)
OK 'a[bcd]*dcdcde' 'adcdcde' (TRUE)
OK '\(\(a\)\(b\)c\)\(d\)' 'abcd' (TRUE)
OK '[ -~]*' 'abc' (TRUE)
OK '[a-zA-Z_][a-zA-Z0-9_]*' 'alpha' (TRUE)
OK 'multiple words of text' 'uh-uh' (FALSE)
OK 'multiple words' 'multiple words, yeah' (TRUE)
OK '\(.*\)c\(.*\)' 'abcde' (TRUE)
OK '(\(.*\), \(.*\))' '(a, b)' (TRUE)
OK 'abcdefghijklmnopqrstuvwxyz' 'abcdefghijklmnopqrstuvwxyz' (TRUE)
OK '^[a-z]*$' 'abcdefghijklmnopqrstuvwxyz' (TRUE)
OK '^[a-l]*$' 'abcdefghijkl' (TRUE)
OK '^[a-m]*$' 'abcdefghijklm' (TRUE)
OK '^[a-n]*$' 'abcdefghijklmn' (TRUE)
OK '^[a-o]*$' 'abcdefghijklmno' (TRUE)
OK '^[a-p]*$' 'abcdefghijklmnop' (TRUE)
OK '^[a-q]*$' 'abcdefghijklmnopq' (TRUE)
OK '^[a-r]*$' 'abcdefghijklmnopqr' (TRUE)
OK '^[a-s]*$' 'abcdefghijklmnopqrs' (TRUE)
program returned 0
Enter a pattern followed by text...
** re_exec disagrees for 'ab+bc' 'abbc' (unix says FALSE)
OK 'ab+bc' 'abc' (FALSE)
OK 'ab+bc' 'abq' (FALSE)
** re_exec disagrees for 'ab+bc' 'abbbbc' (unix says FALSE)
** re_exec disagrees for 'ab?bc' 'abbc' (unix says FALSE)
** Unexpected M3 result (FALSE) for ab?bc
OK 'ab?bc' 'abc' (FALSE)
OK 'ab?bc' 'abbbbc' (FALSE)
** re_exec disagrees for 'ab?c' 'abc' (unix says FALSE)
OK '\(\(\(\(\(\(\(\(a\)\)\)\)\)\)\)\)' 'a' (TRUE)
** re_exec disagrees for 'abc\)' '' (unix says FALSE)
** re_exec disagrees for 'a\(abc' '' (unix says FALSE)
OK '[ -~ -~]*' 'abc' (TRUE)
OK '\(\(\(\(\(\(\(\(\(\(a\)\)\)\)\)\)\)\)\)\)' 'a' (TRUE)
** Unexpected M3 result (FALSE) for \(^\)*
** re_exec disagrees for '\(^\)*' '' (unix says TRUE)
OK '$' '' (TRUE)
** Unexpected M3 result (FALSE) for \(a*\)*
** re_exec disagrees for '\(a*\)*' '' (unix says TRUE)
** Unexpected M3 result (FALSE) for \([abc]\)*d
** re_exec disagrees for '\([abc]\)*d' 'abbbcd' (unix says TRUE)
** Unexpected M3 result (FALSE) for \([abc]\)*bcd
** re_exec disagrees for '\([abc]\)*bcd' 'abcd' (unix says TRUE)
OK '\)\(' '' (FALSE)
** Unexpected M3 result (FALSE) for $
** re_exec disagrees for '$' 'abc' (unix says TRUE)
program returned 0
--- building in I386_OPENBSD ---
unable to read ../src/m3overrides, options "-override" and "-x" ignored.
quake extension tests
------------------------------------------------------------------------------
string function tests
------------------------------------------------------------------------------
------ t001 ------------------------------------------------------------------
quake("a = \" ha ha\" res = skipl( a )")
expected: "ha ha"
result: "ha ha"
==> OK
------ t002 ------------------------------------------------------------------
quake("a = \" ha\" res = skipl( a )")
expected: "ha"
result: "ha"
==> OK
------ t003 ------------------------------------------------------------------
quake("a = \" ha \" res = skipr( a ) & \"x\"")
expected: " hax"
result: " hax"
==> OK
------ t004 ------------------------------------------------------------------
quake("a = \" ha \" res = compress( a ) & \"x\"")
expected: "hax"
result: "hax"
==> OK
------ t005 ------------------------------------------------------------------
quake("a = \"apple plum orange\" b = split(a, \" \") res = b[0] & b[2]")
expected: "appleorange"
result: "appleorange"
==> OK
------ t006 ------------------------------------------------------------------
quake("a = \"applepie\" res = sub(a, 5, 3)")
expected: "pie"
result: "pie"
==> OK
------ t007 ------------------------------------------------------------------
quake("a = \"applepie\" res = sub(a, 7, 3)")
expected: "e"
result: "e"
==> OK
------ t008 ------------------------------------------------------------------
quake("a = \"a
b
c
\" res = squeeze(a)")
expected: "a
b
c
"
result: "a
b
c
"
==> OK
------ t009 ------------------------------------------------------------------
quake("a = \"applepie\" res = tcontains(a, \"pie\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ t010 ------------------------------------------------------------------
quake("a = \"applepie\" res = tcontains(a, \"pies\")")
expected: ""
result: ""
==> OK
------ t011 ------------------------------------------------------------------
quake("a = \"applepie\" res = pos(a, \"pie\")")
expected: "5"
result: "5"
==> OK
------ t012 ------------------------------------------------------------------
quake("a = \"applepie\" res = pos(a, \"pies\")")
expected: "-1"
result: "-1"
==> OK
------ t013 ------------------------------------------------------------------
quake("a = \"applepie\" n = pos(a, \"pie\") res = sub(a, n, 1)")
expected: "p"
result: "p"
==> OK
------ t014 ------------------------------------------------------------------
quake("res = bool(\"true\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ t015 ------------------------------------------------------------------
quake("res = bool(\"tRuE\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ t016 ------------------------------------------------------------------
quake("res = bool(\"TRUE\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ t017 ------------------------------------------------------------------
quake("res = bool(\"y\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ t018 ------------------------------------------------------------------
quake("res = bool(\"yes\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ t019 ------------------------------------------------------------------
quake("res = bool(\"Y\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ t020 ------------------------------------------------------------------
quake("res = bool(\"YES \")")
expected: "TRUE"
result: "TRUE"
==> OK
------ t021 ------------------------------------------------------------------
quake("res = bool(\"no\")")
expected: ""
result: ""
==> OK
------ t022 ------------------------------------------------------------------
quake("res = bool(\"false\")")
expected: ""
result: ""
==> OK
------ t023 ------------------------------------------------------------------
quake("res = bool(\"foo\")")
expected: ""
result: ""
==> OK
------ t024 ------------------------------------------------------------------
quake("res = bool(\"0\")")
expected: ""
result: ""
==> OK
------ t025 ------------------------------------------------------------------
quake("res = bool(\"1\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ t026 ------------------------------------------------------------------
quake("a = \"aabaacabbbaccbca\" res = subst_chars(a, \"b\", \"d\")")
expected: "aadaacadddaccdca"
result: "aadaacadddaccdca"
==> OK
------ t027 ------------------------------------------------------------------
quake("a = \"aabaacabbbaccbca\" res = subst_chars(a, \"bc\", \"dd\")")
expected: "aadaadadddadddda"
result: "aadaadadddadddda"
==> OK
------ t028 ------------------------------------------------------------------
quake("a = \"aabaacabbbaccbca\" res = del_chars(a, \"b\")")
expected: "aaaacaaccca"
result: "aaaacaaccca"
==> OK
------ t029 ------------------------------------------------------------------
quake("a = \"aabaacabbbaccbca\" res = del_chars(a, \"bc\")")
expected: "aaaaaaa"
result: "aaaaaaa"
==> OK
------ t030 ------------------------------------------------------------------
quake("a = \"aabaacabbbaaccbca\" res = subst(a, \"aa\", \" 42 \", 1)")
expected: " 42 baacabbbaaccbca"
result: " 42 baacabbbaaccbca"
==> OK
------ t031 ------------------------------------------------------------------
quake("a = \"aabaacabbbaaccbca\" res = subst(a, \"aa\", \" 42 \", 2)")
expected: " 42 b 42 cabbbaaccbca"
result: " 42 b 42 cabbbaaccbca"
==> OK
------ t032 ------------------------------------------------------------------
quake("a = \"aabaacabbbaaccbca\" res = subst(a, \"aa\", \" 42 \", 99)")
expected: " 42 b 42 cabbb 42 ccbca"
result: " 42 b 42 cabbb 42 ccbca"
==> OK
------ t033 ------------------------------------------------------------------
quake("a = [ \"a\", \"b\", \"c\" ] res = add_prefix(a, \"pre-\")")
expected: "pre-a pre-b pre-c"
result: "pre-a pre-b pre-c"
==> OK
------ t034 ------------------------------------------------------------------
quake("a = [ \"a\", \"b\", \"c\" ] res = add_suffix(a, \"-suf\")")
expected: "a-suf b-suf c-suf"
result: "a-suf b-suf c-suf"
==> OK
------ t035 ------------------------------------------------------------------
quake("a = \"0123456789\"res = len( a )")
expected: "10"
result: "10"
==> OK
------ t036 ------------------------------------------------------------------
quake("a = [ \"a\", \"b\", \"c\" ] res = len( a )")
expected: "3"
result: "3"
==> OK
------ t037 ------------------------------------------------------------------
quake("a = { \"a\" : \"b\", \"c\" : \"d\" } res = len( a )")
expected: "2"
result: "2"
==> OK
------------------------------------------------------------------------------
large string tests
------------------------------------------------------------------------------
16 32 64 128 256 512 1k 2k 4k 8k 16k 32k 64k 128k 256k 512k 1m OK
------ t100 ------------------------------------------------------------------
quake("a = subst_chars(b, \"bc\", \"xy\") res = subst_chars(b, \"xy\", \"bc\")")
expected: "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef012
result: "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef012
==> OK
------ t101 ------------------------------------------------------------------
quake("res = sub(del_chars(b, \"0123456789cdef\"), 0, 10)")
expected: "ababababab"
result: "ababababab"
==> OK
------ t102 ------------------------------------------------------------------
quake("res = len( b )")
expected: "1048576"
result: "1048576"
==> OK
------------------------------------------------------------------------------
pathname tests
------------------------------------------------------------------------------
------ p001 ------------------------------------------------------------------
quake("res = pn_valid(a)")
expected: "TRUE"
result: "TRUE"
==> OK
------ p002 ------------------------------------------------------------------
quake("res = pn_valid(d)")
expected: "TRUE"
result: "TRUE"
==> OK
------ p003 ------------------------------------------------------------------
quake("res = pn_valid(e)")
expected: "TRUE"
result: "TRUE"
==> OK
------ p004 ------------------------------------------------------------------
quake("res = pn_absolute(a)")
expected: "TRUE"
result: "TRUE"
==> OK
------ p005 ------------------------------------------------------------------
quake("res = pn_absolute(d)")
expected: ""
result: ""
==> OK
------ p006 ------------------------------------------------------------------
quake("res = pn_absolute(e)")
expected: ""
result: ""
==> OK
------ p007 ------------------------------------------------------------------
quake("res = pn_decompose(a)")
expected: "/ a b c"
result: "/ a b c"
==> OK
------ p008 ------------------------------------------------------------------
quake("res = pn_decompose(d)")
expected: " d e"
result: " d e"
==> OK
------ p009 ------------------------------------------------------------------
quake("res = pn_decompose(e)")
expected: " e.ext"
result: " e.ext"
==> OK
------ p010 ------------------------------------------------------------------
quake("res = pn_decompose(d)[0]")
expected: ""
result: ""
==> OK
------ p011 ------------------------------------------------------------------
quake("res = pn_decompose(d)[1]")
expected: "d"
result: "d"
==> OK
------ p012 ------------------------------------------------------------------
quake("res = pn_decompose(d)[2]")
expected: "e"
result: "e"
==> OK
------ p013 ------------------------------------------------------------------
quake("res = pn_compose(pn_decompose(a))")
expected: "/a/b/c"
result: "/a/b/c"
==> OK
------ p014 ------------------------------------------------------------------
quake("res = pn_compose(pn_decompose(d))")
expected: "d/e"
result: "d/e"
==> OK
------ p015 ------------------------------------------------------------------
quake("res = pn_prefix(a)")
expected: "/a/b"
result: "/a/b"
==> OK
------ p016 ------------------------------------------------------------------
quake("res = pn_prefix(pn_prefix(a))")
expected: "/a"
result: "/a"
==> OK
------ p017 ------------------------------------------------------------------
quake("res = pn_prefix(e)")
expected: ""
result: ""
==> OK
------ p018 ------------------------------------------------------------------
quake("res = pn_last(a)")
expected: "c"
result: "c"
==> OK
------ p019 ------------------------------------------------------------------
quake("res = pn_last(a2)")
expected: "b"
result: "b"
==> OK
------ p020 ------------------------------------------------------------------
quake("res = pn_last(d)")
expected: "e"
result: "e"
==> OK
------ p021 ------------------------------------------------------------------
quake("res = pn_last(e)")
expected: "e.ext"
result: "e.ext"
==> OK
------ p022 ------------------------------------------------------------------
quake("res = pn_base(a & \".txt\")")
expected: "/a/b/c"
result: "/a/b/c"
==> OK
------ p023 ------------------------------------------------------------------
quake("res = pn_base(a & \".\")")
expected: "/a/b/c."
result: "/a/b/c."
==> OK
------ p024 ------------------------------------------------------------------
quake("res = pn_base(a)")
expected: "/a/b/c"
result: "/a/b/c"
==> OK
------ p025 ------------------------------------------------------------------
quake("res = pn_base(e)")
expected: "e"
result: "e"
==> OK
------ p026 ------------------------------------------------------------------
quake("res = pn_lastbase(a & \".txt\")")
expected: "c"
result: "c"
==> OK
------ p027 ------------------------------------------------------------------
quake("res = pn_lastbase(e)")
expected: "e"
result: "e"
==> OK
------ p028 ------------------------------------------------------------------
quake("res = pn_lastext(a)")
expected: ""
result: ""
==> OK
------ p029 ------------------------------------------------------------------
quake("res = pn_lastext(a & \".txt\")")
expected: "txt"
result: "txt"
==> OK
------ p030 ------------------------------------------------------------------
quake("res = pn_lastext(e)")
expected: "ext"
result: "ext"
==> OK
------ p031 ------------------------------------------------------------------
quake("res = pn_replace_ext(a & \".txt\", \"log\")")
expected: "/a/b/c.log"
result: "/a/b/c.log"
==> OK
------ p032 ------------------------------------------------------------------
quake("res = pn_replace_ext(e, \"log\")")
expected: "e.log"
result: "e.log"
==> OK
------ p033 ------------------------------------------------------------------
quake("res = pn_join(a, d)")
expected: "/a/b/c/d/e"
result: "/a/b/c/d/e"
==> OK
------ p034 ------------------------------------------------------------------
quake("res = pn_join2(a, d, \"log\")")
expected: "/a/b/c/d/e.log"
result: "/a/b/c/d/e.log"
==> OK
------ p035 ------------------------------------------------------------------
quake("res = pn_join(a, pn_parent())")
expected: "/a/b/c/.."
result: "/a/b/c/.."
==> OK
------ p036 ------------------------------------------------------------------
quake("res = pn_join(pn_current(), d)")
expected: "./d/e"
result: "./d/e"
==> OK
------------------------------------------------------------------------------
file system tests
------------------------------------------------------------------------------
------ f001 ------------------------------------------------------------------
quake("res = fs_exists(\".\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ f002 ------------------------------------------------------------------
quake("res = fs_exists(\"..\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ f003 ------------------------------------------------------------------
quake("res = fs_exists(\"..\" & SL & \"src\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ f004 ------------------------------------------------------------------
quake("res = fs_isdir(\".\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ f005 ------------------------------------------------------------------
quake("res = fs_isdir(\"..\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ f006 ------------------------------------------------------------------
quake("res = fs_isdir(\"..\" & SL & \"src\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ f007 ------------------------------------------------------------------
quake("res = fs_isfile(\".\")")
expected: ""
result: ""
==> OK
------ f008 ------------------------------------------------------------------
quake("res = fs_isfile(\"..\")")
expected: ""
result: ""
==> OK
------ f009 ------------------------------------------------------------------
quake("res = fs_isfile(\"..\" & SL & \"src\")")
expected: ""
result: ""
==> OK
------ f010 ------------------------------------------------------------------
quake("res = fs_isfile(\"..\" & SL & \"src\" & SL & \"m3makefile\")")
expected: "TRUE"
result: "TRUE"
==> OK
------ f011 ------------------------------------------------------------------
quake("res = fs_isdir(\"..\" & SL & \"src\" & SL & \"m3makefile\")")
expected: ""
result: ""
==> OK
findexe(more)
------ f012 ------------------------------------------------------------------
quake("res = fs_executable( more )")
expected: "TRUE"
result: "TRUE"
==> OK
chmod -w onlyread
------ f013 ------------------------------------------------------------------
quake("res = fs_writable( onlyread )")
expected: ""
result: ""
==> OK
------ f014 ------------------------------------------------------------------
quake("res = fs_writable(\"..\" & SL & \"src\" & SL & \"m3makefile\")")
expected: "TRUE"
result: "TRUE"
==> OK
findexe(cm3)
------ f015 ------------------------------------------------------------------
quake("fs_putfile( orange, data ) res = fs_contents( orange )")
expected: "line1
line2line3
"
result: "line1
line2line3
"
==> OK
--------------------------------------
dirs = a/b
dirs_0 = a/b/c
dirs_1 = a/b/cc
dirs_2 = a/b/ccc
dirs_3 = a/bb
fn_a = a/b/c/a
fn_b = a/b/c/b
fn_c = a/b/c/c
------ f016 ------------------------------------------------------------------
quake("fs_mkdir( dirs_0 ) res = fs_isdir( dirs_0 )")
expected: "TRUE"
result: "TRUE"
==> OK
------ f017 ------------------------------------------------------------------
quake("fs_mkdir( dirs_1 ) res = fs_isdir( dirs_1 )")
expected: "TRUE"
result: "TRUE"
==> OK
------ f018 ------------------------------------------------------------------
quake("fs_mkdir( dirs_2 ) res = fs_isdir( dirs_2 )")
expected: "TRUE"
result: "TRUE"
==> OK
------ f019 ------------------------------------------------------------------
quake("fs_mkdir( dirs_3 ) res = fs_isdir( dirs_3 )")
expected: "TRUE"
result: "TRUE"
==> OK
------ f020 ------------------------------------------------------------------
quake("res = fs_lsdirs( dirs, \"\" )")
expected: "a/b/c a/b/cc a/b/ccc"
result: "a/b/c a/b/cc a/b/ccc"
==> OK
------ f021 ------------------------------------------------------------------
quake("res = fs_lsdirs( dirs, \"T\" )")
expected: "c cc ccc"
result: "c cc ccc"
==> OK
------ f022 ------------------------------------------------------------------
quake("fs_touch( fn_a ) res = fs_isfile( fn_a )")
expected: "TRUE"
result: "TRUE"
==> OK
------ f023 ------------------------------------------------------------------
quake("fs_touch( fn_b ) res = fs_isfile( fn_b )")
expected: "TRUE"
result: "TRUE"
==> OK
------ f024 ------------------------------------------------------------------
quake("fs_touch( fn_c ) res = fs_isfile( fn_c )")
expected: "TRUE"
result: "TRUE"
==> OK
------ f025 ------------------------------------------------------------------
quake("res = fs_lsfiles( dirs_0, \"\" )")
expected: "a/b/c/a a/b/c/b a/b/c/c"
result: "a/b/c/a a/b/c/b a/b/c/c"
==> OK
------ f026 ------------------------------------------------------------------
quake("res = fs_lsfiles( dirs_0, \"T\" )")
expected: "a b c"
result: "a b c"
==> OK
------ f027 ------------------------------------------------------------------
quake("res = fs_lsfiles( dirs, \"T\" )")
expected: ""
result: ""
==> OK
------ f028 ------------------------------------------------------------------
quake("fs_rmfile(fn_b) res = fs_lsfiles( dirs_0, \"T\" )")
expected: "a c"
result: "a c"
==> OK
------ f029 ------------------------------------------------------------------
quake("fs_rmfile(fn_b) res = fs_lsfiles( dirs_0, \"T\" )")
expected: "a c"
result: "a c"
==> OK
------ f030 ------------------------------------------------------------------
quake("fs_rmdir(dirs_3) res = fs_lsdirs( \"a\", \"T\" )")
expected: "b"
result: "b"
==> OK
------ f031 ------------------------------------------------------------------
quake("fs_rmdir(dirs_3) res = fs_lsdirs( \"a\", \"T\" )")
expected: "b"
result: "b"
==> OK
------ f032 ------------------------------------------------------------------
quake("fs_rmrec(dirs) res = fs_lsdirs( \"a\", \"T\" )")
expected: ""
result: ""
==> OK
------ f033 ------------------------------------------------------------------
quake("fs_touch(dirs) res = fs_lsfiles( \"a\", \"T\" )")
expected: "b"
result: "b"
==> OK
------ f034 ------------------------------------------------------------------
quake("fs_cp( orange, apple ) res = fs_contents( apple )")
expected: "line1
line2line3
"
result: "line1
line2line3
"
==> OK
------ f035 ------------------------------------------------------------------
quake("fs_cp( orange, apple2 ) res = fs_contents( apple2 )")
expected: "line1
line2line3
"
result: "line1
line2line3
"
==> OK
------ f036 ------------------------------------------------------------------
quake("res = fs_lsfiles( \"a\", \"T\" )")
expected: "b apple"
or expected: "apple b"
result: "b apple"
==> OK
------ f037 ------------------------------------------------------------------
quake("fs_rmfile(apple2) res = fs_lsfiles( \"a\", \"T\" )")
expected: "b"
result: "b"
==> OK
------ f099 ------------------------------------------------------------------
quake("fs_rmrec(\"a\") res = fs_lsdirs( \".\", \"T\" )")
expected: ""
result: ""
==> OK
------------------------------------------------------------------------------
exec tests
------------------------------------------------------------------------------
------ e001 ------------------------------------------------------------------
rc = 0
out = total 16
-rw-r--r-- 1 hudson users 17 Aug 27 01:31 apple
-rw-r--r-- 1 hudson users 195 Aug 27 01:31 m3make.args
-r--r--r-- 1 hudson users 0 Aug 27 01:31 onlyread
-rw-r--r-- 1 hudson users 17 Aug 27 01:31 orange
-rw-r--r-- 1 hudson users 39 Jul 23 09:34 x
------ e002 ------------------------------------------------------------------
quake(res = q_exec( "cm3 -version > cm3.version" )) --> OK
------ e003 ------------------------------------------------------------------
quake(res = q_exec( "rm cm3.version" )) --> OK
------ e004 ------------------------------------------------------------------
a
b
c
------ e005 ------------------------------------------------------------------
quake(res = q_exec( "echo a && echo b && echo c" )) --> a
b
c
OK
------ e006 ------------------------------------------------------------------
quake(res = q_exec( "echo a && false || echo c" )) --> a
c
OK
------ e007 ------------------------------------------------------------------
quake(res = q_exec( "echo a | cat -" )) --> a
OK
------ e008 ------------------------------------------------------------------
quake(res = q_exec( "echo abcdefgh | sed -e 's/d/4/g' | sed -e 's/h/8/g'" )) --> abc4efg8
OK
------ e009 ------------------------------------------------------------------
quake(res = q_exec( "true && echo abcdefgh | sed -e 's/d/4/g' | sed -e 's/h/8/g'" )) --> abc4efg8
OK
------ e010 ------------------------------------------------------------------
quake(res = q_exec( "echo abcdefgh | sed -e 's/d/4/g' ; echo abcdefgh | sed -e 's/h/8/g'" )) --> abc4efgh
abcdefg8
OK
------ e011 ------------------------------------------------------------------
quake(res = q_exec( "echo abcdefgh | sed -e 's/d/4/g' && echo abcdefgh | sed -e 's/h/8/g'" )) --> abc4efgh
abcdefg8
OK
------ e012 ------------------------------------------------------------------
quake(res = q_exec( "echo a&&echo b;echo c" )) --> a
b
c
OK
------ e013 ------------------------------------------------------------------
quake(res = q_exec( "false||echo b;echo c" )) --> b
c
OK
------ e014 ------------------------------------------------------------------
quake(res = q_exec( "false||false;echo c" )) --> c
OK
------ e016 ------------------------------------------------------------------
quake(res = q_exec( "echo 1 && echo 2 && echo 10 && echo 20" )) --> 1
2
10
20
OK
------ e017 ------------------------------------------------------------------
quake(res = q_exec( "echo 1 x 2 x 10 x 20" )) --> 1 x 2 x 10 x 20
OK
------ e018 ------------------------------------------------------------------
quake(res = q_exec( "echo 1>x && echo 2>>x" )) -->
OK
------ e019 ------------------------------------------------------------------
quake(res = q_exec( "echo 11 22 33 1>x" ) x = fs_contents("x") if not equal(x, "11 22 33
") res = 99 end) --> OK
------ e020 ------------------------------------------------------------------
quake(res = q_exec( "echo 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16>x" ) x = fs_contents("x") if not equal(x, "1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
") res = 99 end) --> OK
------------------------------------------------------------------------------
directory stack tests
------------------------------------------------------------------------------
------ d001 ------------------------------------------------------------------
quake("pushd( \"..\" ) base = getwd() popd() res = tcontains( base, \"test\" )")
expected: "TRUE"
result: "TRUE"
==> OK
base = /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-sys/m3quake/test
------ d002 ------------------------------------------------------------------
quake("pushd( src ) wd = getwd() res = subst( wd, base, \"\", 1 )")
expected: "src"
result: "src"
==> OK
------ d003 ------------------------------------------------------------------
quake("cd( base ) wd = getwd() res = subst( base, wd, \"\", 1 )")
expected: "/"
result: "/"
==> OK
------ d004 ------------------------------------------------------------------
quake("popd() wd = getwd() res = subst( wd, base, \"\", 1 )")
expected: "I386_OPENBSD"
result: "I386_OPENBSD"
==> OK
------------------------------------------------------------------------------
miscellanoues tests
------------------------------------------------------------------------------
hostname = xobsd.jkhome
date = 2010-08-27
datetime = 2010-08-27 08:32:04
datestamp = 2010-08-27-08-32-04
tests done
------------------------------------------------------------------------------
summary
------------------------------------------------------------------------------
135 tests succeeded:
t001 t002 t003 t004 t005 t006 t007 t008 t009 t010 t011 t012 t013 t014 t015 t016 t017 t018 t019 t020 t021 t022 t023 t024 t025 t026 t027 t028 t029 t030 t031 t032 t033 t034 t035 t036 t037 t100 t101 t102 p001 p002 p003 p004 p005 p006 p007 p008 p009 p010 p011 p012 p013 p014 p015 p016 p017 p018 p019 p020 p021 p022 p023 p024 p025 p026 p027 p028 p029 p030 p031 p032 p033 p034 p035 p036 f001 f002 f003 f004 f005 f006 f007 f008 f009 f010 f011 f012 f013 f014 f015 f016 f017 f018 f019 f020 f021 f022 f023 f024 f025 f026 f027 f028 f029 f030 f031 f032 f033 f034 f035 f036 f037 f099 e002 e003 e005 e006 e007 e008 e009 e010 e011 e012 e013 e014 e016 e017 e018 e019 e020 d001 d002 d003 d004
0 tests failed:
stderr:
3 rmrec => rmrec dir a/b
5 rmrec a/b
7 rmrec(a/b) => rmrec a/b/c
5 rmrec a/b/c
6 rmrec(a/b/c) => rm a/b/c/a
6 rmrec(a/b/c) => rm a/b/c/c
7 rmrec(a/b) => rmrec a/b/cc
5 rmrec a/b/cc
7 rmrec(a/b) => rmrec a/b/ccc
5 rmrec a/b/ccc
3 rmrec => rmrec dir a
5 rmrec a
6 rmrec(a) => rm a/b
--- building in I386_OPENBSD --- new source -> compiling t.m3 new "t.mo" -> linking t performing cm3 M3Path... => . a => a a/ => a a// => a a/. => a a//. => a abc => abc abc/ => abc abc// => abc abc/. => abc abc//. => abc / => / /foo => /foo /foo/bar => /foo/bar c:\ => c:\ c: oo => c: oo c: oo//bar => c: oo/bar c: oo//bar\/// => c: oo/bar\ c: oo//\bar\/// => c: oo/\bar\ c:/// oo//\bar\/// => c:/ oo/\bar\ /cygdrive/c/foo => /cygdrive/c/foo /cygdrive/1/foo => /cygdrive/1/foo ygdrive oo => ygdrive oo ygdrive\1 oo => ygdrive\1 oo /// => // // => // \ => \ \\ => \\ //foo//bar//// => //foo/bar x in Letters1:TRUE X in Letters1:TRUE 1 in Letters1:FALSE x in Letters2:TRUE X in Letters2:TRUE 1 in Letters2:FALSE program returned 0
--- building in I386_OPENBSD ---
new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking test
TestSLE.TestBacksub:begin
A=M4x4{
V4{0.849474166943447, 6.007512527121, 8.90719665798228, 9.66987746267574},
V4{ 0, 5.14460848343308, 3.97610379798622, 2.62643259284852},
V4{ 0, 0, 5.59829538386701, 5.81647464462857},
V4{ 0, 0, 0, 8.75757268120887}
}
B=V4{166.740744639888, 83.5138163218407, 71.3232457389059, 25.9929325912686}
knownX=V4{9.94089463353199, 7.25485522254596, 9.65644751615191, 2.96805216895791}
foundX=V4{9.94089463353198, 7.25485522254596, 9.65644751615191, 2.96805216895791}
TestSLE.TestHouseholder:begin
A=M4x4{
V4{4.25624776743643, 8.98598192408028, 6.52345727926747, 9.00632751995527},
V4{9.60571576064719, 1.64548220035875, 8.57129351737504, 9.0593772103588},
V4{2.93732122958979, 9.35307352860601, 4.14229934086199, 3.08148274906514},
V4{5.1437801235373, 3.95034326919836, 7.88994747410526, 6.88452253496485}
}
HouseHolder(A)=M4x4{
V4{4.25624776743643, -13.4516559727034, -4.50376673985578, 1.78503169608586},
V4{-11.2852162247536, 13.2230142269445, 11.377816861096, -2.54724079656635},
V4{ 0, 8.22348441192892, -1.36290678119615, 2.92046829433476},
V4{ 0, 0, -2.85850150436503, 0.812196630437251}
}
TestSLE.TestTridiag:begin
A=M3x3{
V3{ 1, 1, 0},
V3{ 0.5, 2, 1},
V3{ 0, 0.5, 3}
}
knownX=V3{ 1, 2, 3}
r= V3{ 3, 7.5, 10}
foundX=V3{ 1, 2, 3}
TestSLE.TestLU:begin
Factorize M4x4{
V4{ 1, 2.3, -0.3, 0.7},
V4{ 0, -1.2, -0.5, 0.1},
V4{ 0, 0, -0.3, 0.7},
V4{ 0, 0, 0, 0.4}
}
LU factors: sign =1
L = M4x4{
V4{ 1, 0, 0, 0},
V4{ 0, 1, 0, 0},
V4{ 0, -0, 1, 0},
V4{ 0, -0, -0, 1}
}
U = M4x4{
V4{ 1, 2.3, -0.3, 0.7},
V4{ 0, -1.2, -0.5, 0.1},
V4{ 0, 0, -0.3, 0.7},
V4{ 0, 0, 0, 0.4}
}
det = 0.144
Inverse(A) =M4x4{
V4{ 1, 1.91666666666667, -4.19444444444444, 5.11111111111111},
V4{ -0, -0.833333333333333, 1.38888888888889, -2.22222222222222},
V4{ -0, -0, -3.33333333333333, 5.83333333333333},
V4{ 0, 0, 0, 2.5}
}
Inverse(A)*A =M4x4{
V4{ 1, 8.52182907573606e-17, 4.22838847269347e-17, 4.68809019382732e-16},
V4{ 0, 1, -1.78893358460108e-17, -2.04751580273888e-16},
V4{ 0, 0, 1, 2.18358317538581e-16},
V4{ 0, 0, 0, 1}
}
knownX = V4{ 0.7, 1.3, -0.2, 0.3}
foundX = V4{0.700000000000001, 1.3, -0.2, 0.3}
Factorize M4x4{
V4{ 1, 0, 0, 0},
V4{ 2.3, -1.2, 0, 0},
V4{ -0.3, -0.5, -0.3, 0},
V4{ 0.7, 0.1, 0.7, 0.4}
}
LU factors: sign =1
L = M4x4{
V4{ 1, 0, 0, 0},
V4{ -0.3, 1, 0, 0},
V4{ 0.7, -0.2, 1, 0},
V4{ 2.3, 2.4, 1.125, 1}
}
U = M4x4{
V4{ 1, 0, 0, 0},
V4{ 0, -0.5, -0.3, 0},
V4{ 0, 0, 0.64, 0.4},
V4{ 0, 0, 0, -0.45}
}
det = 0.144
Inverse(A) =M4x4{
V4{ 1, 0, 0, 0},
V4{1.91666666666667, -0.833333333333333, -2.51643324233886e-16, 5.20417042793042e-17},
V4{-4.19444444444444, 1.38888888888889, -3.33333333333333, -8.67361737988404e-17},
V4{5.11111111111111, -2.22222222222222, 5.83333333333333, 2.5}
}
Inverse(A)*A =M4x4{
V4{ 1, 0, 0, 0},
V4{-3.50706876733886e-16, 1, 1.11922190265679e-16, 2.08166817117217e-17},
V4{4.79596830998963e-16, 2.13370987545147e-16, 1, -3.46944695195362e-17},
V4{-5.55111512312578e-16, -4.30211422042248e-16, 3.33066907387547e-16, 1}
}
knownX = V4{ 0.7, 1.3, -0.2, 0.3}
foundX = V4{ 0.7, 1.3, -0.2, 0.3}
Factorize M4x4{
V4{ 1, 2.3, -0.3, 0.7},
V4{ 0.3, -1.2, -0.5, 0.1},
V4{ 0, 2.3, -0.3, 0.7},
V4{ 0, 0, -0.1, 0.4}
}
LU factors: sign =1
L = M4x4{
V4{ 1, 0, 0, 0},
V4{ 0.3, 1, 0, 0},
V4{ 0, -1.21693121693122, 1, 0},
V4{ 0, -0, 0.125165562913907, 1}
}
U = M4x4{
V4{ 1, 2.3, -0.3, 0.7},
V4{ 0, -1.89, -0.41, -0.11},
V4{ 0, 0, -0.798941798941799, 0.566137566137566},
V4{ 0, 0, 0, 0.329139072847682}
}
det = 0.497
Inverse(A) =M4x4{
V4{ 1, -1.59323509246745e-16, -1, -1.3162214373974e-16},
V4{0.0301810865191147, -0.100603621730382, 0.352112676056338, -0.643863179074447},
V4{0.55533199195171, -1.85110663983903, -1.52112676056338, 2.15291750503018},
V4{0.138832997987928, -0.462776659959759, -0.380281690140845, 3.03822937625755}
}
Inverse(A)*A =M4x4{
V4{ 1, -5.10659223240673e-16, 1.35297589104466e-16, -2.08069238921693e-16},
V4{8.0552833283884e-18, 1, -1.58564567726005e-17, 7.91467585914418e-18},
V4{-4.60785923306339e-17, 1.14708589848966e-16, 1, 1.14437539305845e-16},
V4{5.13640779215008e-18, 2.86771474622416e-17, -3.90583832637903e-17, 1}
}
knownX = V4{ 0.7, 1.3, -0.2, 0.3}
foundX = V4{ 0.7, 1.3, -0.2, 0.3}
Factorize M4x4{
V4{ 1, 0, 0, 0},
V4{ 0, 0, 0, 0.1},
V4{ 0, 0.8, 0, 0},
V4{ 0, 0, -0.1, 0}
}
LU factors: sign =1
L = M4x4{
V4{ 1, 0, 0, 0},
V4{ 0, 1, 0, 0},
V4{ 0, 0, 1, 0},
V4{ 0, 0, -0, 1}
}
U = M4x4{
V4{ 1, 0, 0, 0},
V4{ 0, 0.8, 0, 0},
V4{ 0, 0, -0.1, 0},
V4{ 0, 0, 0, 0.1}
}
det = -0.008
Inverse(A) =M4x4{
V4{ 1, 0, 0, 0},
V4{ 0, 0, 1.25, 0},
V4{ -0, -0, -0, -10},
V4{ 0, 10, 0, 0}
}
Inverse(A)*A =M4x4{
V4{ 1, 0, 0, 0},
V4{ 0, 1, 0, 0},
V4{ 0, 0, 1, 0},
V4{ 0, 0, 0, 1}
}
knownX = V4{ 0.7, 1.3, -0.2, 0.3}
foundX = V4{ 0.7, 1.3, -0.2, 0.3}
TestSLE.TestDeterminant:begin
Determinants 1 1 1
Determinants 1 1 1
Determinants -1 -1 -1
Determinants 46 46 46
Determinants -27 -27 -27
Determinants 16 16 16
TestFunctional.TestDeriv:begin
first:
V5{0.862437679942209, 0.793962663878407, 0.64389749571342, 0.340975557822423, -1.00564767646732}
~ V5{0.862437679949313, 0.793962663869774, 0.643897495722356, 0.340975557810985, -1.00564767646638}
(dif 1.1437906177747e-11)
second:
M5x5{
V5{ 0, 1.68294196961579, 1.81859485365136, 0.282240016119734, -1.51360499061586},
V5{1.68294196961579, 0.282240016119734, -1.91784854932628, 1.31397319743758, 0.824236970483513},
V5{1.81859485365136, -1.91784854932628, 1.97871649324676, -1.99998041310141, 1.98121471138974},
V5{0.282240016119734, 1.31397319743758, -1.99998041310141, 1.30057568031423, 0.299754419325905},
V5{-1.51360499061586, 0.824236970483513, 1.98121471138974, 0.299754419325905, -1.81115672401325}
}
~ M5x5{
V5{ 0, 1.68294156388526, 1.81859499681636, 0.282238954429914, -1.51360479705431},
V5{1.68294156388526, 0.282238676874158, -1.91784865766209, 1.31397392966193, 0.824237345042888},
V5{1.81859499681636, -1.91784865766209, 1.97871496965263, -1.99998045902205, 1.98121463679257},
V5{0.282238954429914, 1.31397392966193, -1.99998045902205, 1.30057298264319, 0.299754665533669},
V5{-1.51360479705431, 0.824237345042888, 1.98121463679257, 0.299754665533669, -1.81115789033015}
}
(dif 4.78371362588881e-6)
program returned 0
--- building in I386_OPENBSD --- new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking TestBitVector *** Set/Reset Bit Test *** Testing upward... Passed! Testing downward... Passed! *** Iterator Test *** Passed! *** LeastUnset() Test *** Testing upward... Passed! Testing downward by squares... Passed! *** LeastUnsetExcept() Test *** Test 1... Passed! Test 2... Passed! *** Read/Write Interval Test *** Testing intra-words... Passed! Testing inter-words... Passed! *** Set Interval Test *** All intra-word intervals: Passed! Inter-word intervals: Pased! *** Copy Test *** Passed! *** Cardinality Test *** Passed! *** Bitwise Test 1 *** Testing against empty vectors... Passed! *** Bitwise Test 2 *** Passed! All tests passed! program returned 0
--- building in I386_OPENBSD --- unable to read ../src/m3overrides, options "-override" and "-x" ignored. new "/home/hudson/work/cm3-inst/xobsd/current--all-pkgs/pkg/m3core/I386_OPENBSD/libm3core.a" -> linking test
--- building in I386_OPENBSD --- new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking TestUDP
--- building in I386_OPENBSD --- package "binIO" is already overridden to /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs, ignoring new override to /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/binIO/test/../.. new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking Test 120 120 TRUE 120 program returned 0
--- building in I386_OPENBSD --- -> linking Demo allocating environment... => ok available databases: => ok source: OpenLink desc: OpenLink (MT) => no data found freeing environment... => ok done. program returned 0 stderr: /usr/local/lib/libiodbc.so.3.15: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/local/lib/libiodbc.so.3.15: warning: strcpy() is almost always misused, please use strlcpy() /usr/local/lib/libiodbc.so.3.15: warning: strcat() is almost always misused, please use strlcat() /usr/local/lib/libiodbc.so.3.15: warning: sprintf() is often misused, please use snprintf()
--- building in I386_OPENBSD ---
-> linking Demo
Fatal Error: package build failed
stderr:
Demo2.mo(.text+0x1a): In function `Demo2__exit_nicely':
/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:15: undefined reference to `PQfinish'
Demo2.mo(.text+0x227): In function `Demo2_M3':
/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:52: undefined reference to `PQstatus'
Demo2.mo(.text+0x2db):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:54: undefined reference to `PQerrorMessage'
Demo2.mo(.text+0x361):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:59: undefined reference to `PQexec'
Demo2.mo(.text+0x38b):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:60: undefined reference to `PQresultStatus'
Demo2.mo(.text+0x3ca):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:62: undefined reference to `PQclear'
Demo2.mo(.text+0x3f4):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:67: undefined reference to `PQclear'
Demo2.mo(.text+0x505):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:70: undefined reference to `PQexec'
Demo2.mo(.text+0x5c9):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:81: undefined reference to `PQresultStatus'
Demo2.mo(.text+0x63a):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:86: undefined reference to `PQresultStatus'
Demo2.mo(.text+0x679):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:88: undefined reference to `PQclear'
Demo2.mo(.text+0x6a3):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:91: undefined reference to `PQclear'
Demo2.mo(.text+0x6d6):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:93: undefined reference to `PQexec'
Demo2.mo(.text+0x700):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:94: undefined reference to `PQresultStatus'
Demo2.mo(.text+0x73f):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:96: undefined reference to `PQclear'
Demo2.mo(.text+0x783):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:102: undefined reference to `PQnfields'
Demo2.mo(.text+0x7cc):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:104: undefined reference to `PQfname'
Demo2.mo(.text+0x889):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:111: undefined reference to `PQftype'
Demo2.mo(.text+0x9aa):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:123: undefined reference to `PQntuples'
Demo2.mo(.text+0xa17):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:126: undefined reference to `PQgetvalue'
Demo2.mo(.text+0xaaa):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:131: undefined reference to `PQclear'
Demo2.mo(.text+0xaf7):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:134: undefined reference to `PQexec'
Demo2.mo(.text+0xb21):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:135: undefined reference to `PQclear'
Demo2.mo(.text+0xb6e):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:138: undefined reference to `PQexec'
Demo2.mo(.text+0xb98):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:139: undefined reference to `PQclear'
Demo2.mo(.text+0xbc7):/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/../src/Demo2.m3:142: undefined reference to `PQfinish'
/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/I386_OPENBSD/libpostgres95.so: undefined reference to `PQsetdbLogin'
collect2: ld returned 1 exit status
m3_link => 1
linker failed linking: Demo
"/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/src/m3makefile", line 12: quake runtime error: execution failed: execution of `./Demo' failed: errno=2
--procedure-- -line- -file---
q_exec -- <builtin>
include_dir 12 /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/src/m3makefile
8 /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/postgres95/test/I386_OPENBSD/m3make.args
--- building in I386_OPENBSD --- -> linking Demo database [test]: user [admin]: password [foobar]: *** DB.Error *** state: IM002 native: 0 desc: [iODBC][Driver Manager]Data source name not found and no default driver specified. Driver could not be loaded ***************** program returned 0 stderr: /usr/local/lib/libiodbc.so.3.15: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/local/lib/libiodbc.so.3.15: warning: strcpy() is almost always misused, please use strlcpy() /usr/local/lib/libiodbc.so.3.15: warning: strcat() is almost always misused, please use strlcat() /usr/local/lib/libiodbc.so.3.15: warning: sprintf() is often misused, please use snprintf()
--- building in I386_OPENBSD ---
unable to read ../src/m3overrides, options "-override" and "-x" ignored.
new source -> compiling StableTestObj.m3
"../I386_OPENBSD/StableTestObj.m3", line 1: syntax error: missing INTERFACE or MODULE keyword
"../I386_OPENBSD/StableTestObj.m3", line 1: unable to find interface (<missing id>)
"../I386_OPENBSD/StableTestObj.m3", line 1: warning: file name (StableTestObj.m3) doesn't match module name (<missing id>)
2 errors and 1 warning encountered
compilation failed => not building program "Test"
Fatal Error: package build failed
stderr:
"/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/stable/test/src/m3makefile", line 26: quake runtime error: execution failed: execution of `./Test' failed: errno=2
--procedure-- -line- -file---
q_exec -- <builtin>
include_dir 26 /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/stable/test/src/m3makefile
7 /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-db/stable/test/I386_OPENBSD/m3make.args
--- building in I386_OPENBSD --- new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking test stderr: /usr/X11R6/lib/libXaw.so.13.0: warning: wcscpy() is almost always misused, please use wcslcpy() /usr/X11R6/lib/libXaw.so.13.0: warning: strcpy() is almost always misused, please use strlcpy() /usr/X11R6/lib/libXmu.so.10.0: warning: strcat() is almost always misused, please use strlcat() /usr/X11R6/lib/libXaw.so.13.0: warning: sprintf() is often misused, please use snprintf() /usr/bin/ld: warning: libX11.so.11.2, needed by /home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/caltech-parser/drawcontext/dcpane/I386_OPENBSD/libdcpane.so, may conflict with libX11.so.12.0
--- building in I386_OPENBSD --- new "/home/hudson/workspace/cm3-current-test-all-pkgs-I386_OPENBSD/cm3/m3-libs/m3core/I386_OPENBSD/libm3core.a" -> linking test